Separate names with a comma.
Not done yet, it seems ;)
Done! (I hope)
MBL working great and BB printing better then ever :)
Hi elmoret! I see that you are an administrator and I found a post you made in 2014 on maximum extrusion rate. I have a 3DP1000 weith standard E3Dv6 & volcano extruder. I can't find the maximum extrusion rate on the hot end and am trying to increase mine. Who would I ask or do you know where this information would be?
There is no maximum extrusion rate listed for the hotend, because it is a function of many things - nozzle size, extrusion temperature, the material being extruded (there are many types of ABS and PLA for example, each with varying flow properties).
E3D's testing showed 1.75mm filament had a little higher extrusion rate than 3.0mm, and increasing temperature will always result in faster flow rates - but eventually there is a limit on how fast the polymer can be melted. The only way to improve that is to lengthen the heaterblock (which is why Volcano prints faster than v6).
Running a 3d Hub as a hobby does not pay for itself, but still awesome fun!
upgraded to legit popolu stepper drivers, so silent!
Duet Installed, Steppers Stepping, Heaters Heating, Fans Spinning, PanelDue PanelDuing. Now to work out the firmware kinks
Back for good...
Artist looking forward to working with other creatives to mutually move 3D printing forward.
In what fashion exactly?
Off to LA and California 'til Feb 20!
How was California? First time to theh US?
Great and yes...
Thank You Again! I finally got R6 installed, works so much better!
Tonight's the night for the DuetWifi upgrade!
Hoping someone make the guide how to enable MBL some time.. ABL and I are not friends.
I changed firmware
Duet Wifi Ordered!!
Where from? is it easy to upgrade the existing board?
Duet3d and yes it's pretty much plug and play. They have a good wiki if you want to read through it.
“Don’t tug on that. You never know what it might be attached to.”
Build finnished quite happy broke IR Mount ;=-
Starting to print my UM2 Extended clone!
AVR DUDE ERROR
No suitable baud rate found.