I was not very happy with the camera angel and with the LEDs the camera looked straight into the left ones. Also the camera had too much of the head so I decided to change the angel. 15° (stock): 25°: And here two images of the cam: 15° (stock): 25°:
I'd love to try this to see how it would improve the camera position. Would you mind sharing the file...
Yes, especially now that the files have been released. There are a few upgrade/revised files already on Thingiverse.com from @Alex9779 and @Spoon Unit
@fpex Tried to post this yesterday! Of course they have to allow it. The files/designs on Thingiverse are shared with Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0). Read about the license here: http://creativecommons.org/licenses/by-sa/3.0/ We can do just about whatever we want with the part designs as long as we release in the same license and give credit.
Since my true ballhead was too sensitive to vibration, I have changed the design taking advantage by the fact my printer is down till the new driver arrives. I remove one degree of freedom but it is much more stable now. UPDATE: this design works wonders.