Separate names with a comma.
I got the touchy! :) also some images of the parts!: [IMG] [IMG] [IMG] [IMG] [IMG]
so, here's the plan: geared extruders(using NSTT) 1/3 DONE printbite+ diamond hotend model future plans: TOUCHY TOUCHY DISPLAY custom interface...
Maybe you have a short in the pt100 connection
wanna link me to cmy petg? :)
Plastic wears down easier, so brass :)
#PostTheSource :)?
YAY ANOTHER PERSON TO THE 3D PRINTING WORLD
check if your X and Y cables are reversed, or if you are an owner of the 1.0 bb check if the cable polarities are correct?
Servo wipers? Pix? :)
Maybe e3d servers ran out of space?
Hai, i too have read it, and am currently upgrading to the 3 colour diamond weeeeeeeeeeee
Firstly welcome to the forums Second Marlin will not let you run a motor if the nozzle temp is not above 170 837 sounds reasonable for a titan but...
From my experience you have the following issues: Lose belts Not calibrated esteps Dusty filament Overheating If you hear pops while printing your...
Not sure about it, but i do know petg can go 300%, test it out
thicker layers, increased extrusion width(does not work the same with different filaments, some can do only 150% while others can do 300%(thats...
Is the extruder temperature over 170° c?
Mine can't lift even 2kg :(
Can we have them in this "flavour"? Or will that not fit inside the bb?
Here's a LINKY!
I know where to get the exact same ones, well very similar