Separate names with a comma.
Does anyone have the edited Arduino firmware for the hotend offsets, bed settings, travel distances etc. I'll even take just the numbers, and plug...
it doesn't home right for the bed. do you have the reduced bed settings?
Anyone have the S3D settings for this set up, and the Arduino Code file settings? the nozzle offset and homing offset. Using Greg's bed mounted IR...
BigBox instructions says half that rate...... look in the firmware update section...
Arduino: 1.6.13 (Mac OS X), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)" Sketch uses 123,906 bytes (48%) of program storage...
AVR DUDE ERROR
Connecting to: /dev/ttyACM0 Changing monitoring state from 'Offline' to 'Opening serial port' Connected to: Serial<id=0x6efbaad0,...
I am happy to report, I got wifi working on my octopi, and my Pi Desktop is fun on the big screen TV with the bluetooth keyboard and touch pad.
but I went through all rumbas and had octopi cycle through all the rates and none worked.
it was cycling through all the baudrates. I saved the trouble of showing the whole cycle; that's also the rate stated in the instructions/wiki I...
No suitable baud rate found.
This is the most recent board sent from big box and it has not been connected to the printer and it has not be tried to have updated firmware...
setup octopi: When trying to push firmware or connect. Error: Unhandled communication error The was an unhandled error while talking to the...
That's a good question, it does seem to transmit data with other devices. I was going to try an octopi-firmware push. I've never had luck with...
Tried on windows XP, Windows 10, iOS 10... none of the rumbas are detected even without connecting them to the printer... If your product doesn't...
have that page memorized thanks though.
"Y cable for the Z axis?
0) Yes Power LED Comes on Green with the power supply, and it comes on Red if the Micro Progammer or USB from the Computer is on, no matter what...
That was just a photo to show everything. Drivers don't impact USB connection, but with or without the drivers it doesn't connect. USB cable isn't...