Separate names with a comma.
Have allot of problems with printing scaffold. The main problem is underextrusion that is getting worse until it completly stops. in most cases...
I have a very strange problem with the oozeless toolchange script the problem is when he switches to the second extruder, and primes it, the...
So after not using it for 7 month due to ilness, I am selling my bigbox. Its a kickstarter dual machine, acrylic white and gray, upgraded to...
After a print fail I noticed a small hole on the middle on the underside of the bed, I am wondering if this is normal or wether a hole was burned...
I have had z-axis issues for some time , mainly with the bed leveling being inconsitent When leveled the bed yesterday (mesh leveling) i had...
This is going on for a couple of days (less than a week) but i got a weird z-axis issue most prints are too high; difference gets bigger when the...
got my titans today I took the extra motor option, but as it turns out they are 1.8 degree motors instead of the current 0.9 motors on my Bigbox...
I have started using colorfabb HT for the high temp parts for 1.1 When I get to the bigger parts however, the part warps and lifts off the bed,...
a gopro mount bracket and corner piece for a gopro camera You must use the mounting holes of the octopi camera...
I keep having weird blobs appear on top of my prints with XT-CF20. these blobs are so big the nozzle slams into them and lifts the whole carriage...
I have trouble printing particular models with scaffold for example this wheel of a T34 RC tank [IMG] there are hidden cavities underneat the...
I am about to start using scaffold and I am wondering if anyone has any pointers on settings (retraction, ...) Also has anyone used it together...
After doing some large prints with a large first layer (in this case the big bottom plate for the open rc F1) i found that there where bed...
I am not sure whether its an actual problem with S3D or my printer but print time is 2-3 times slower than what S3D calculates. the print quality...
My bigbox is suffering from serious under extrusion and after some some time, the extruder clogs up I am still working with the benchy that was...
ok very weird problem when i try to move one of the extruder motors, the z axis instead moves about 4mm and then stops, this is for both...
when i turned on the big box for the first time, the LCD did not work and the beeper was going off constanly, I then turn the connectors 180...
I am stuck with the assembly of the hotends, in partiucular, the PFTE tube and the bowden clip The bowden clip is simply too big to fit into the...
I was wondering what types of filament samples will be included in the kit, for example this new scaffold ?