Separate names with a comma.
Bo, did you ever finish and publish this work?
Call it a rounding error.
Hi, it's been a long time since my last posting here, and I am probably the last of the initial crowd to finally start building my two BigBoxes...
That looks pretty water tight. How did you print the flowers?
That scanner does not look like an x-ray CT (computed tomography) scanner. You can't look into a patient's body with that.
Nice work, Henry. How were those 8 hours divided for the different steps, acquisition and processing vs. pure build time? The talus looks a bit...
... seems you grew up after the DOS age :) More restrictions: The file name must have max. 8 characters, no spaces, at least in the standard...
Actually, it IS an old trick but it needs a warm-up now and then. I used it more than once when experimenting with different combinations of...
Here is an unconventional approach.
In artists' shops you can get a dulling spray which does what it is called. Chalk or something in a solidifying medium. You can wipe that away...
Did anybody ever think of using the Bigbox itself as a 3D-scanner? At least 2.5D? Lots of z movement in the first approach, but hey, is there a...
The David Scanner also started as OpenSource, with tons of user experience pumped into it. Last week I saw that now it is an HP product. At a...
Burnt cork looks different, well, burnt... Thermally, this small hole should be no reason to worry either.
Thanks for that very explicit reply. It confirms my personal preferred opinion (tm). Given the interest and engagement in the (luxurious) choice...
I am aware of the differences :) - just wanted to mention this for the case when people think of extending the simulation goals towards surgery...
Almost twenty years ago, a surgeon I was producing surgery planning models for tried a FDM sample that the friendly folks at stratasys made, based...
Try 'Hartpapier' or even better 'Hartgewebe'. Roughen the surface with 60 or 80 grade sandpaper or emory, clean the surface from allllll dust,...
Jos, you raised the topic of using different fans. I contributed my experience with brushless fans on a rumba's pwm output. When I discussed that...
Here is a link to the fan department of reichelt, a german shop that ships worldwide - Norway should not be a problem. I order most of my hardware...
The C would have to be small enough to save the DC content of the integrated pulse chain. Then, you have a smoothed yet still pulsing DC voltage....