Separate names with a comma.
[img] X1 is in X. X2 is in E2.
Yes, the problem just disappeared completely when I upgraded to Independent Dual Extruders (IDEX). It took some time to get it working correctly...
Have a read through this thread https://forum.e3d-online.com/threads/z-axis-height-way-off.2651/ I had similar problems with dual-extrusion prints...
On the theme of failed prints that take out the printer, I recently came down to find this scene of carnage. I was trying to use support material...
My IDEX build has been working reasonably well but I have recently had a string of failures when attempting long prints. In each case, the...
I downloaded Marlin 1.1.x Bugfix (the latest version) and then made these modifications. And here is my latest S3D profile. No guarantees that it...
The details are in here https://www.thingiverse.com/thing:2350827. The X carriage motors I bought were the ones that Alex recommended -...
Thanks. Build volume is 300 x 200 x 300 as per Alex's design. The box, print bed and electronics are unchanged. Perhaps the perspective of the...
I am very pleased to report that the IDEX conversion has finally fixed my Z height problem with dual extrusion prints! Here is my original...
Both extruders now working. Print quality is excellent! [ATTACH] Onto the offset calibration next. This post from Greg was invaluable. Before...
I have temporarily fitted the original Titan stepper motor and added a longer screw for the X MIN endstop to test whether the stepper driver and...
Turns out one of the pancake stepper motors I received from E3D is faulty. There is minimal resistance to rotation when the power is off, and the...
Thanks,yes. I had forgotten that it was adjustable from the back. I have moved it right to the top of the slots and it is working now. I...
Hi Alex. Thanks for posting pictures of your build. I will add some more of my own. My 20 mm posts have arrived and been fitted to the platform....
Hi @Folkert Kaman I have completed my IDEX build (Alex's design) and have stayed with the Rumba for now using your very helpful RC BugFix...
That's weird! I'm using standard E3D V6s mounted straight into Titan extruders. I've printed all the parts straight from the download on...
Hi Alex I'm still in the calibration stage of my IDEX conversion, tweaking the Marlin RC BugFix firmware to work with my new configuration. I'm...
I've been busy printing all the parts in black Edge and ordering the necessary hardware for this conversion. I started assembling modules last...
Hi @Kick2box Thanks for taking the time to think about this issue and comment. Yes, I did see it when I was researching the problem but I...
Just to register my support, I too have started printing the parts for this upgrade.