Edge and Scaffold Not Printing Correctly

Discussion in 'Filament' started by Liam Woinson, Jul 4, 2017.

  1. Liam Woinson

    Liam Woinson Member

    Joined:
    Feb 9, 2016
    Messages:
    15
    Likes Received:
    0
    I recently bought the pack from e3d with the edge and scaffold.

    I want to clearly use them together but when I print then on my Big Box Dual they seem to ooze out of the hotends when not printing (see attached images). I use S3D and have changed the retract and also the tool change retract with no difference.

    Edge Scaffold
    Hotend - 240 C Hotend - 230C (Seems to work best without jamming)

    Bed - 80C

    The question is does anyone who which settings I have to change or is anyone willing to share their .FFF file?

    I have no issue with just edge on its own I can get good prints with it, it's just when I dual print

    Hope someone can help.

    Thanks


    20170704_162548.jpg 20170704_134616.jpg
     
  2. jet

    jet Well-Known Member

    Joined:
    Mar 29, 2016
    Messages:
    191
    Likes Received:
    18
    Here's mine, I've had pretty good luck with "scaffold/edge med/med"
     

    Attached Files:

Share This Page