Gregs BigBox IDEX Titan Aero With Linear Rail

Discussion in 'Guides, Mods, and Upgrades' started by EASI3D, Sep 12, 2017.

  1. AndyVirus

    AndyVirus Well-Known Member

    Joined:
    Apr 10, 2016
    Messages:
    209
    Likes Received:
    43
    No, there is 1 ball missing per side. On one of my sliders I have 2 balls missing on one side (so 1 ball missing from what is expected) See the Right hand slider in the image below.

    IMG_1857.JPG
     
  2. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,403
    Likes Received:
    729
    Ok my rail arrived yesterday (Misumi), I wonder why it took you so short amount of time, mine took 10 days and I am in Germany...
    Now I am just waiting on the idler pulleys... Ordered some on ebay until I realized they are coming from Hongkong... But I don't find any affordable near me...
     
  3. AndyVirus

    AndyVirus Well-Known Member

    Joined:
    Apr 10, 2016
    Messages:
    209
    Likes Received:
    43
    Found mine on Amazon, 5 for £7 on prime same day. Not sure how fast prime would get to Germany from UK warehouse but might be quicker...https://www.amazon.co.uk/gp/product/B06VSS4VQF/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
     
  4. Rob Heinzonly

    Rob Heinzonly Well-Known Member

    Joined:
    Sep 20, 2015
    Messages:
    356
    Likes Received:
    112
    @Alex9779 : Where did you get the rail ?
     
  5. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,403
    Likes Received:
    729
    It’s from Misumi...
     
  6. Alex9779

    Alex9779 Moderator
    Staff Member

    Joined:
    Sep 4, 2015
    Messages:
    2,403
    Likes Received:
    729
    Appreciated, I ordered some from Amazon Germany, same vendor and they come from the UK but your link told me not sneding to mainland Germany...
    Should arrive on Tuesday or Wednesday... Think I got all then... Ready for the rebuild...
     
  7. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    318
    Likes Received:
    43
    Combining this with moving the BigBox to a 3030 frame. All new bits ordered from misumi as IMO they are worth the money. Should all arrive in the next 7 days. Just some more bits to print (my first printer parts designed solely by me *gulp*) and then hopefully ready for the rebuild!
     
  8. AndyVirus

    AndyVirus Well-Known Member

    Joined:
    Apr 10, 2016
    Messages:
    209
    Likes Received:
    43
    OK seem to have dual prints calibrated pretty much spot on. As a starting point this is my offsets for tool 1:

    G10 P1 U1.4 Y-6.5 Z0.15
     
    Syko_Symatic and Hugofitz like this.
  9. dc42

    dc42 Well-Known Member

    Joined:
    Aug 16, 2016
    Messages:
    163
    Likes Received:
    68
    Is the 6.5mm Y offset accounted for by a difference in the design of the two carriages?
     
  10. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    318
    Likes Received:
    43
    Yes one is slightly further "forward".
     
  11. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    318
    Likes Received:
    43
    My remix with a BLtouch mount built in is now live!! https://www.thingiverse.com/thing:2590416 please give me your opinions or advice. I have not printed it nor am I currently in a position to test it.
     
    Greg Holloway likes this.
  12. Rob Heinzonly

    Rob Heinzonly Well-Known Member

    Joined:
    Sep 20, 2015
    Messages:
    356
    Likes Received:
    112
    Thanks. As I cannot order the rail directly from Misumi, I mailed around. Reprap Universe now will deliver the part :)

    I'm now waiting for all the parts to be delivered. In the meantime I've been studying the design, and I noticed one thing: there are no belt tensioners, is that right ? Do you have to tighten the belts with a pair of pliers ?
     
  13. AndyVirus

    AndyVirus Well-Known Member

    Joined:
    Apr 10, 2016
    Messages:
    209
    Likes Received:
    43
    I did, yes. There are teeth to hold it in place and a grub screw, but no tensioner screw like on the original IDEX Direct caridges. I have printed many dual calibration ying yang parts and no slips.
     
  14. EASI3D

    EASI3D Active Member

    Joined:
    Mar 15, 2016
    Messages:
    35
    Likes Received:
    4
    Did you find a chain that fits, if so do you mind posting link?
    Thanks
     
  15. potti5

    potti5 Active Member

    Joined:
    Dec 12, 2016
    Messages:
    26
    Likes Received:
    10
    This is my remix :) BLTouch and molex fit


    I make that fan little thinner so i can get cables bottom of motor.


    cables came out in middle to molex.


    right side



    I am now printing it out. Maybe in next week i have time to start build this.
     
    #95 potti5, Oct 20, 2017 at 7:54 AM
    Last edited: Oct 20, 2017 at 8:14 AM
    Greg Holloway and Syko_Symatic like this.
  16. Syko_Symatic

    Syko_Symatic Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    318
    Likes Received:
    43
    Is it on Thingiverse? Love the molex integration! Does it increased the carriage size at all?
     
  17. potti5

    potti5 Active Member

    Joined:
    Dec 12, 2016
    Messages:
    26
    Likes Received:
    10
    Not yeat. Need to try it first. I just noticed that molex integration maybe can hit on top support frame but not sure. Probably need to make that little lower then it should to go bottom it.

    carriage size is little bigger becouse of bltouch but it not limit moving area. Linear rail carriage hits first to y carriage.


     
    Greg Holloway likes this.
  18. Miasmictruth

    Miasmictruth Well-Known Member

    Joined:
    Sep 4, 2015
    Messages:
    745
    Likes Received:
    106
    So I have seen a few different numbers flying around. Does any one know for sure what the x axis travel is for the both extruders, or at least one of them.

    Would it be worth trying to shift the bed to give one extruder full range?
     
    Proto_BB likes this.
  19. alexmordue

    alexmordue Member

    Joined:
    Dec 3, 2015
    Messages:
    9
    Likes Received:
    4
    Looking good! I'm planning to upgrade my dual hybrid soon, do you have a link for the front mounted wiper buckets?
     

Share This Page