MSDS and product guides for Edge?

Discussion in 'Filament' started by jet, Aug 20, 2017.

  1. jet

    jet Well-Known Member

    Joined:
    Mar 29, 2016
    Messages:
    231
    Likes Received:
    24
    Are there MSDS pages or product guides for Edge? Or is Edge close enough to PETG that I can just treat it like PETG? I normally use the Thermo Scientific charts and they list PETG as "-" for isopropyl alcohol (and a bunch of other chemicals) and I'd like to edge on the side of lab safety. (I'm making sample cups to go in a dehydrator.)

    If these are on the E3D site then I'm apparently unable to use Google or the Interwebs and maybe shouldn't be allowed near printers. :)
     
  2. Spoon Unit

    Spoon Unit Well-Known Member

    Joined:
    Sep 6, 2015
    Messages:
    1,561
    Likes Received:
    483
    I print it as if it were PETG.
     
  3. jet

    jet Well-Known Member

    Joined:
    Mar 29, 2016
    Messages:
    231
    Likes Received:
    24
    I do. In this case I'm interested in how Edge reacts with a list of chemicals. I can get that for PETG (Thermo Scientific has a great chart) but I'd like to know it for Edge. Today I discovered that my watertight (for 24 hours at room temp) container bleeds 70% isopropyl in less than a minute.
     

Share This Page