Alex9779

Thank You Again! I finally got R6 installed, works so much better!

Hi..loaded Marlin.RC_Titan_MBL.hex which allowed to to mbl but now machine doest not recognise card or give "print from sd" option in menu..also it tried to read bed height from 0,0 so the infrared sensor is over side of glass and has nothing to read from so crashes nozzle on glass..im very sad :(

Thank you for the help in the past!

Hi Alex
I am sooo close to finishing my bigbox but when I get to the 3rd point on the auto levelling sequence the IR sensor goes completely of the bed causing the extruder to be jammed against the bed with my only option to be turning off the power. what should I do

Hi Alex I have just tried auto homing my bigbox but the z motors almost look like they are jamming up I have tried disconnecting them from the lead screw but they still jam and make a sound is there anything you can think of that might cause them to run smoothly.
Thanks

Ups, I did not read the next one. it was there :D... thank a lot.

hi @Alex9779,
Do you mind if I ask your mod design, based on this topic http://forum.e3d-online.com/index.php?threads/bigbox-1-1.1041/page-14
Does your S3D Hybrid profile also mod by you or you are using Greg's ? May I ask that profile too.

Thank you very much for your contribution to this community, I wish I have the ability to help others like you do.