Separate names with a comma.
the reason for going for step files are that they are far more easy to place and move arround, a hole is a nice ring with a cross in the middle...
hehe, it might be that i do get a mains powered one, not afraid one mains, you just have to apply a thick coat of common sense and make sure to...
So over the last few weeks i have been building up a model of the dual Bigbox this is for several reasons, but mostly to get familiar with the...
at the main assembly state now, so far i miss spec's on the o-rings in the carriage, the stp/step file for the mains socket cover during the...
moving along slowly i only found one error in the dxf's for for the cork on y axis brackets, the holes do not lign up perfecttly but its an easy...
so far for each of the printed parts i have located them either in bigbox_v1.1.0.stp or Hybrid_v1.1.0..stp and saved them as individual parts so...
if not much mistaken it should be here inside the red circle: [MEDIA] those are the bigbox_v1.1.0.stp from the step.zip found on thingiverse
you dont have to happen the step/stp version of the file? they are at least 10 times more easy to work with in Fusion360 while on the subject of...
hit a small road block, the printed cover for the IEC socket, i could not find it in either the Hybrid_v1.1.0..stp or bigbox_v1.1.0.stp will look...
the reason why i ask all these questions are that i feel/think that the build info (https://wiki.e3d-online.com/BigBox_Build_Manual) leave out a...
Q.... was the BigBox ever made in a version with dual titan direct? or is the hybrid term because one extruder was direct and the other was...
so i started out going through https://wiki.e3d-online.com/BigBox_Parts_Preparation the ir sensor part is a bit of a puzzle as i in the...
for the fun of it i have started to collect printed parts, hardware and dxf's in fusion 360 one funny thing is that the cork dxf's do not open...
am i wrong or is there something with the model that @TstarkEngineering made in SW? i tried to import the files in Fusion 360 and it makes an...