Separate names with a comma.
I have the "H" model right in front of me (ironically stock oem on my printer before the hemera) and the model supplied with Hemera is not the...
Thats why I chose the bigger Noctua (as you have with the Sunon) which actually pushes more air than stock. I'm using the 40x20 according to the...
Been up to 260 and it wasn't the solution for me.
I would but health and safety guildelines forbid me working in the same environment as the stock fan without industrial hearing protection. The...
OK buddy, seems I'm making progress... wierdness ensues. So I know that TPU traditionally prints better slower so after many fails due to...
I'm clutching at straws now but is it right that the Hemera has this nasty jagged hole with something sticking out? I've seen loads of online...
Can print PETG and PLA all day long without a problem. Did have a few tweaks early doors but that didn't take long to iron out.
Nope, I've hit 260 with filaflex before another adventure in air-printing.
So no, it's not considerably noisier but there is a whine where there was none. Yes @ 90%. Regarding the brand see the other tpu threads. I've...
Dab some oil around about 10cm of filament, not a huge abount though. I Oil some kitchen towel and wipe the filament through it. I will generally...
Worth pointing out that I had been printing without adjusting vref and it was quiet. Clocked up and it's noticably noisier. TPU is still clogging...
I call complete BS acusing Sainsmart. As mentioned above I have many (well 7 is many I suppose) TPU's of varying degees of hardness, some are...
There seems to be a problem thats widely observed and that is not being addressed. To collate the things I have tried and changed to date. can...
Glad your issue is "solved" but aside from open up and service I'm not picking up on what you think the route cause is. I appreciate the language...
Not wishing to jump on the OP's post but I can at least confirm some of the above. I have suffered the same issues as the OP with stock part...
