Greg Holloway's Recent Activity

  1. Greg Holloway replied to the thread Duet questions.

    Looks like you are trying to move the bed too fast. Try slowing everything down and then gradually increase the speed. That includes the...

    Dec 6, 2019 at 9:06 AM
  2. Greg Holloway replied to the thread PTFE-lined heatbreak?.

    they are cheap, and I wouldn't want to use one.

    Dec 5, 2019 at 11:38 AM
  3. Greg Holloway liked mhe's post in the thread Basic Hermes ordered..

    You're the man, as always!

    Dec 4, 2019 at 1:26 PM
  4. Greg Holloway replied to the thread Basic Hermes ordered..

    Yup, am looking at what can be done now.....

    Dec 4, 2019 at 10:32 AM
  5. Greg Holloway replied to the thread Basic Hermes ordered..

    My bad updated some files and forgot to put them back, reploaded now. They are the same for both tools anyway.

    Dec 4, 2019 at 10:01 AM
  6. Greg Holloway liked Micked's post in the thread Nema 14 BMG direct extruder.

    I just wanted to share a toolhead I've been working on for little while: [ATTACH] It's a bit of a mish-mash of things I had on hand,...

    2019-12-03-184418_600x758_escrotum.png IMG_20191128_214718_.jpg IMG_20191130_165251_.jpg IMG_20191126_213744_.jpg IMG_20191203_182540_.jpg IMG_20191203_182807_.jpg Dec 4, 2019 at 9:57 AM
  7. Greg Holloway liked blarbles's post in the thread Almost Direct Drive Tool Head.

    I know everyone has probably moved on to the Hemera but just in case someone implemented the almost direct drive solution I wanted to...

    screwadapted.jpg Dec 3, 2019 at 2:22 PM
  8. Greg Holloway liked p3t3rp4nd4's post in the thread DIY Motion System and Tool Changer.

    Today i recieved some missing parts and could install the tools. [ATTACH] Also did the first toolchanging test with all 4 tool. Needs...

    3.jpg Dec 3, 2019 at 10:05 AM
  9. Greg Holloway liked mhe's post in the thread Basic Hermes ordered..

    Ordered 4 Hemeras as well. This will be glorious.

    Dec 3, 2019 at 10:04 AM
  10. Greg Holloway replied to the thread Speed movement after prime.

    check the config.g file?

    Dec 2, 2019 at 2:14 PM
  11. Greg Holloway replied to the thread hemera hotend.

    Hi, There is this... https://e3d-online.dozuki.com/Guide/LulzBot+Taz6+Hemera+Upgrade/123

    Dec 2, 2019 at 1:54 PM
  12. Greg Holloway liked garethky's post in the thread BMG + Mosquito + Tool Changer.

    Printed my first test parts for the design this evening. I didn't expect these to work, just wanted a gut check on tolerances,...

    IMG_4876.jpg Dec 2, 2019 at 10:54 AM
  13. Greg Holloway liked Jai Stanley's post in the thread Various nozzle sizes - calibration and MT printing.

    Excellent! Thanks for replying so quickly.

    Dec 1, 2019 at 4:28 PM
  14. Greg Holloway attached a file to the thread Various nozzle sizes - calibration and MT printing.

    I think I used these ones. If not search on thingiverse.

    Dec 1, 2019 at 9:41 AM
  15. Greg Holloway replied to the thread DIY Motion System and Tool Changer.

    Looking forward to more updates :) I have released two Hemera Tools. This is a new tool design for the Hemera....

    Dec 1, 2019 at 9:40 AM