Separate names with a comma.
Yea: sorry guys: I've been slow to publish. I got stuck doing house chores and setting up a new main computer SSD, and a XPEnology NAS on an old...
Might be a good idea to print a small interface that clips to your support, locking it in XYZ. Very small amount of material used per print and...
I would also consider having a sensor on each tool dock position for robustness. After all; in the event of a reset it's useful to know if a tool...
Yea: grip the ferrule in the crimpers by ratcheting them one or two clicks, so you can poke the stripped wire in with one hand, and crimp with the...
Fantastic! Your setup is quite similar to mine: I have a nozzle x 0.4, copper plated 0.4, 0.25 nozzle x and a 0.6 nozzle x on a volcano. All...
Here's what they are like on the printer: [IMG] [IMG] I have a filament feed from above as an experiment (blue teflon) so ignore that. Also...
Ultimately: I'm now quite pleased with the extruders... The goal of utilising the bowden parts that I bought 4 of and giving a cheap upgrade path...
Used an older prototype extruder on the volcano tool last night. Had to mix and match parts to make sure it had decent backlash and clearnace due...
My hemera has the older Titan style clear 40mm fan (also noisy AF) as my toolchanger already had the wiring with a plug in place so wanted that...
Hells yea. This is VERY high on my want list.... for precision more than print quality, if those things aren't the same thing. I guess with a...
Yea: I think you're right as a first step... That allows you to use slicer or firmware to predict behaviours of the motion system and pre-program...
Excellent! I saw they weren't on the site again and thought they weren't being made anymore.
Does anyone have any experience of tuning extruder acceleration, jerk and pressure advance settings? The lower 'jerk' (instantanious speed...
Update: I've had real trouble getting consistant extrusion and think I've sussed out why: The gears were quite hard to turn by hand. First I...
Good lord Greg: I hope I didn't offend you. I just like to point out the pro's and cons of every approach. There's a reason the Hemera is the...
