Separate names with a comma.
The PI is used to run OctoPI, which allows you to control the machine from a web browser, upload files etc. It's not really required, but is very...
I'll be really interested in how it goes. I've been thinking about trying either a Tusk...
Here is the original blog post for that fan https://drmrehorst.blogspot.com/2018/01/the-mother-of-all-print-cooling-fans.html, and he has a couple...
I have a 7" paneldue on my bigbox, with full z height. I believe I got the enclosure from this thread...
Yes that was it - thanks @orcinus - I should have thought to link it.
@Greg Holloway just had a quick look at the docs and they still recommend using thread lock on the electronics panel - does that need updating too?
Really glad I've seen this thread - I certainly didn't know about the effect of 242 (and similar) on plastics. Thanks for posting.
Very nice work - I like that way you've added a lighting circuit too. That adds a lot to the model.
The only time I use the cooling fan with PETG (or indeed anything other than PLA) is when bridging - otherwise, the fan is off. Inconsistent...
That should be right - have a look here... https://wiki.e3d-online.com/BigBox_Fixings_Errors_List There is a full BOM here...
Don't know if this will help, but here are some extracts from a slicer generated gcode file that printed well for me using Spoolworks Edge (Basalt...
I don't think I've ever had one quite that bad, but the closest I've seen to that was when I had inadvertently used the wrong nozzle diameter in...
I'ts certainly a bit delayed :) You should be fine with the early set of tips - if you already have another 3d printer, I'd really recommend...
also, recheck your first layer height. If that's too small, a raft can be more forgiving. Some discussion of a similar issue here...
Useful info - thanks