Separate names with a comma.
Printer makes a clicking noise in about the same spot when moving along Y on the left side. Appears to be in the linear bearing holder/belt...
The binding does not seem to be the issue, what is happening is that, in attempting to clear or prime the nozzle, the X offset is not correct and...
OK, so examining the gcode of "benchy" directly, apparently the commands are in the gcode and are part of the "wiping" procedure. So what appears...
Decided to try once more and captured this, which looks like it is being commanded to move max in +Y: Recv: T:27.11 /0.00 B:22.56 /0.00...
Still struggling to get this BB Hybrid going. Now running it via external Pi4b and Octoprint. Manual direction control and expected distance,...
I have an "external" Pi 4b, running OctoPi/Octoprint, that is connected to a PC via a hardwired ethernet connection, running Windows 10 and...
Sorting issues with Prusa and Octoprint, where BB starts a print then crashes "off bed" in + Y as if the slicer, or something, thinks the bed is...
Posted this in error in the E3D forum. Re-posting here. I am absolutely new to OctoPi/Octoprint. Running on Pi 4B 8GB. Printers connected via...
I am absolutely new to OctoPi/Octoprint. Running on Pi 4B 8GB. Printers connected via Pi USB, PC connects to PI via wired Ethernet. Windows...
Having difficulty getting BB to connect with MC (Matter Control) via USB. I can see some communication M105 sent, but a communications failure. I...
