Separate names with a comma.
[ATTACH] [ATTACH] Here is my ADD mount for the Orbiter. It uses the stock E3D hotend components, and has an ADD teflon tube length of 55mm. All...
Trying to align the true bed shape with the settings in PrusaSlicer. The default setting was 300 in X and 200 in Y size. I'm printing a very...
@Greg Holloway , OK, I did the 12V conversion for the different cooling fan. It is the same form factor as the 24V Winsinn versions, it is this...
Yes, though the replacement fans are 12V. I'll be running a buck converter feeding the + side of the fan cable set to 12V. Leaving the Duet...
Well, if its a dodgy fan, I have four of them. I'll wait until I get the two fans I bought locally, and let you know.
@Greg Holloway : I have six fans for the toolchanger from E3D. Two of the "bad" non-pwm capable fans I received with my original Toolchanger...
I don't think so, I removed the fan from the tool, and ramped it to M106 P4 S255, and it was VERY weak. I believe it to be a fan problem.
I posted the part at the end of this coment in the ToolChanger section, but just saw this thread in this section. I am having exactly this...
I'm not sure nema8 would be powerful enough. The nema 11 I've used first is a 14 oz./in fan which weighs around 190g, giving a 394g all up tool...
Moved this discussion to the Getting Started section, as there is already a fan issues thread there which covers this problem.
I designed a new docker piece using your STL file. Just like the receiver tool dock which has a flange separating the magnet from the surface, I...
Thanks for the response and the file! What do you think about using a niobium magnet oriented properly for mating to the dock magnet? Too strong?...
Do you think the socket head screw gave more magnetic attraction due to its larger mass? Anything helping the pull force would be welcome. And in...
Not real impressed with the print quality. I've only been printing for a very short period. Hard to print real fast due to the gear reduction....
