Separate names with a comma.
I have the same problem. Crazy for the problem I discovered a possible cause of this. If you watch the photos you must agree with me that there is...
I have the same problem. The extruder part is cold, so it isn't a problem of fan or similar. When the filament stops of go outside I tried to...
I have to do it, but I believe that there aren't solution really. A critical design or something similar. When the weather started to be hot, over...
I tryed with no diference. After a time it clogged. And I tried with a new fan. Now I'm looking for the original Bowden system and I believe that...
The Hemera has been working from first of year until now. All the cable and connectors are ok. It's a recent problem that I can't understand...
It's exactly as described, white part just the border. Now it's clogged. I hot around 250°C and insert the filament manually and I note a "soft"...
I'm sorry, I had a little accident and I was during a month in the hospital. Now I'm fine. Yesterday I made some things (all parts from...
Ok, thank you so much. Tomorrow I'll tell you if this was the problem.
How is the way? Blow into?
The power supply offers 25V. At fan I have 24.7V. The fan is new and original from e3e-online.com because with the first I broke one blade...
I have to stop printing because the nozzle is in the air. Them I only heat around 240º, unload filament, push into the heat breaker with a 1.9...
Yes, and Vref adjusted.
Yes, and i changed it for another original one trying to solve the problem. I changed nozzle, heater, heat breaker, block, fan and filament. I...
Yes, I put a new heat break with thermal compound (one from computer with a very high transfer coeficient). I have the problem with all my...
I have the same issue. I have changed heat breaker, nozzle, fan,... And I believe that it isn't a gears problem. Filament is marked because it...
