Separate names with a comma.
I think you should look at OpenBuilds.Org - just build/cut exactly what you need. For large industrial heaters try BriskHeat - but you will need...
Hello Stian, I found a solution to your problem. Full explanation in the link below:...
This is my solution (tested and verified) to the Titan skipping/clicking problem. I posted my original findings in the link below:...
https://forum.e3d-online.com/index.php?threads/titan-clicking-sound-backlash-solution-and-suggestion.2190/ This may or may not help you. But it...
Your problem is not the pancake motor.
Hello Haydn, You have 50 kilos of 3mm filament ?!? Wow! Delta is usually bowden, and Titan is usually direct, so the two would be incompatible...
Hello Haydn, I print primarily in Polycarbonate, so my print speed is slowed down to an extreme to get the objects to print near perfect - so I'm...
I finally sorted these problems out (by editing Marlin and importing missing definitions into the thermistor table) and am now printing with...
I shall be attempting to 3D print a modified idler for the Titan using Acetal (generic Delrin) filament. The modification will be to integrate a...
Here you go Haydn. E3D Titan, V6 and hardened nozzle printing 3mm Polycarbonate at 325*C, bed at 145*C on a modified Lulzbot Taz 5 (Lulzbot is 3mm...
This is just from my experience using the Titan and V6 on my Lulzbot Taz. Hopefully the info here will be helpful to others. If your Titan starts...
[ATTACH] [ATTACH] Hello All, I found that the Titan mount design in the link below did not allow for direct and easy access to the idler...