Separate names with a comma.
If anyone wants to say something relevant to BigBox and wants that posting to be useful to other people (or at least hopes it might be) then...
@Miasmictruth - that is a superb job; is this wiring task the sort of thing that you do often? I ask only because - as my photos clearly show -...
Another way to label the cables is to use the ties with flat label areas...
I have been having a similar issue :-( I ran a PLA pre-heat via the LCD, mainly as a test of the wiring and things seemed to go pretty much ok -...
Is there going to be any BigBox presence at the UK Maker Faire, perhaps even E3D themselves?
One suggestion for gluing the nuts: don't do it at the end of the evening and drift into a reverie, only stopping when you realise that you've run...
If you haven't found it yet, the list of all the Wiki Users is available at http://wiki.e3d-online.com/wiki/Special:ListUsers - at the moment, if...
When I got to that point, it was a real struggle - and I thought I'd done the prep on that. I ended up disassembling the whole lot and, as you...
Not having a Dremel around the house, I used a short piece of dowelling that was to hand and made a sandpaper lollipop (strip of paper, sticky...
In lieu of a nut trap that clips into place, instead of using tape you could use a drop of superglue to hold the nut trap in the support -...
I did manage to flatten the battery very quickly on a short set of calipers - I was keeping them in a mug on the desk, along with the usual pens...
That looks like a really neat arrangement, with the position indicators on the females lined up. I can't tell from the photos, but I hope that...
Just so long as it is fog and not smoke, especially not the magic smoke :-)
You can string together some cable ties (not the ones from the BB parts, just cheap junk) and use them to hold the carriage in one corner, until...