Separate names with a comma.
I have uploaded the original .hex file with Xloader and all is what it was when I first started BB. But what still remains is the "Thermal...
Yes.... homing is working ....
After my Flashing Firmware adventure I once again tried to print the Benchy. When I try to Auto Level the bed the nozzle is trying to go thru the...
Many many thanks for all your help. I solved the problem by to have more patience. I didn't wait for the Compile/Upload to end but stopt Arduino...
I already did. Thanks
Forgot to say that I solved the first error. I had to Unzip the dowloaded Marlin first
The Verify/Compile ended with Invalid Library Found C:\Program Files (x86)\Arduino\libraries\Arduino_1.6.x: C:\Program Files...
Because the Verify/Compile in the Arduino gave an error I saw that I downloaded the wrong version (actual is now v 1.6.9). Then I downloaded...
Goodmorning to all of you that is trying to help me. After a good night sleep I am ready to make the BB print. And @Bluemalu no hard feelings. I...
I really appreciate your help...The thing is that I am in 3D printing for more than 3 years with assembled printers (Leapfrog Creatr and...
Sorry guys, but how do I perform a PID calibration?
At 166 degr I get the message Thermal Runaway
I used the "Preheat PLA" in home position. The temp starts climbing to the 220 degr that is set and immidiately starts dropping when it reaches that
Hi Alex, I just tested with two generated gcodes "orig" is the gcode that was allready on de SD I got with the printer and "test" witch I made...