Separate names with a comma.
Very high jerk, partially works too.
This is madness, so I can print shell with very high speeds, but top/bottom layers and infill should be printed with low jerk and speed, that way...
Increasing EJERK to 10.0 made surface better
#define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 #define S_CURVE_ACCELERATION Jerk is...
I truly can't understand what gives those pulsations on the surface near to edges, it eventually screws up entire print, because every layer adds...
I found couple of issues by now, but fixing them didn't fix entire issue yet, looking for other issues. When `S_CURVE_ACCELERATION` you want to...
As a workaround it could work, but c'mon, walls look awesome, and if I set walls thickness to infinity I get no over extrusion, which means flow...
I have just installed a brand new original hardened steel nozzle instead of standard one, another $23 wasted.
I've been fighting this issue alone for too long, it's time to give up and ask for community help. So I have e3d genuine titan, (genuine) v6, and...