Separate names with a comma.
...when using the TFT-35 and the "extrude" option, no clicking or jamming. Firmware is set to 392.97 E steps.* It seems very similar to a thread I...
...0.8 nozzle). I could never get past beyond layer “1.5” (started jamming at the half of the second layer) now it seems to be finishing even...
My Kossel has a V5 that is prone to jamming due to the teflon insert. Other then the form factor (which i can print an adaptor for) would the Revo...
...Capricorn PTFE tubing. I can’t get it to extrude properly without jamming. I’ve made sure the hotend fan is on continuously at 100%. I’ve...
I have just installed a cyclops+ Hot end on my CR10 with duet wifi, Set-up my RepRap firmware and drove a little filament through both sides...
Hi all, short introduction: I'm Niklas, this is my first post, I've registered after assembling and doing first tests with my (company's)...
...I've been having same problem with original hotend - filament jamming, also one heater and thermistor gave up the ghost and quit working, so my...
...or deposit blobs that are ugly at best and lead to the print head jamming on them ripping off the print at worst. It's still usable, but...
...reason I went crazy. I separated the Bowden tube and low and behold, no jamming blobs! I feel stupid, which is the norm for me.... Thanks again!
Hopefully this will help some others out there experiencing jamming issues. In the past I have used cheap clones for printing with my AM8, so...
Jamming with pla is solvable or better that I have it back to amazon and purchase a different hot end?
...the problem of finding the right retract value because of massiv jamming and stringing, first i thought it's because of wrong settings, tried...
So I have been printing TPU with the Hemera with no real problems - 92A, 95A, 98A all work OK. However, I recently got a spool of Fillamentum TPU...
...in order to stop filament deforming and bulging, as that leads to jamming, which is what you're experiencing. Furthermore, your filament looks...
...with preventing the jams/kinks with TPU. I've been printing almost 3 hours with no issues which last print I had several issues with jamming....
...and for flexibles. Using my artillery sidewinder SX-1 I'm jamming just as everyone else has demonstrated regardless of tension with fairly...
Have the same issues (ref pictures). Tried different temps, tensions, nozzles, etc. but no change. E3d did mess up big time with the Hemera in my...
...was the trick. At 230c on both printers I am able to print without jamming (for now) .... After the temp increase - I also 'backed off' the...
...from the heatbreak to the heatsink is effective. Heatcreep would be the result of failing to use the thermal paste, the symptoms of which is...
...prevent the heatcreep and materials like PLA/TPU grinding and jamming. This was mostly done as the Noctua extruder fans do pump a bit less air...