Separate names with a comma.
Yup. Possibly something for future iterations.
There were never any 2.6 instructions. You are right that there is no switch, that's about the only difference from what I can remember....
Yes there should be a gap, read the documentation on assembly....
Get a Prusa | https://shop.prusa3d.com
Can you post a photo of the assembled hotend please. It might be that the heater block is up against the heatsink.
the problem is likely the bed temperature is too low. I print PEEK on UHU gluestick at 160C but I have a HT bed. Let the gluye dry off at 80C for...
We have two beds coming out in the next few months. One is a direct replacement and alternative to the bigbox bed and the other is a new high...
No - When the first production units (not beta) ship we will release everything.
In advance of what?
I have my own solution, but I haven't implemented or tested it.
No - No need for NEMA 23
No - should be before.
No - we are not supplying wiring or cables.
Yup, that and the toolchanger :cool:
You're best off starting fresh. I've not used marlin for a BigBox IDEX in over a year.
Things are happening. We are 100% going ahead with the project.
There will be a blog post in the coming weeks which will tell you everything you...
For the original prototype, yes you are close.
All gone, sorry.
in the firmware you want fan kickstart turned on.
The hiwin rails don't come with lubrication. They are packed with 'shipping oil' and then you add your own lubricant on install. The limiting...