Separate names with a comma.
Somebody's Lost in (cyber)Space?
It's the https://wiki.e3d-online.com/Single_&_Dual_Direct-Drive_IR_Sensor_Bracket
That only shows if you order more than one???I ordered anyway and had an email saying that they have shipped:confused:
I think the nuts are back on the menu!
(there is no "out of stock" message).
Use a larger nozzle.
If you are building from scratch you could consider rotating the heated bed 90° to give more room, rather than redesigning the frame.
I don't know if will be any help but I had a problem with the sensor,it would react to everything but the glass bed.I eventually solved it by very...
That's the camera cable.
Here is the link to Dave Crocker's Troubleshooting page:
It just seems like you are building a 3d printer minus XYZ control, when what you need (as far as I know) is the equivalent of a welding rod and...
Have you considered friction welding?
or adapting a heatgun or similar (maybe a soldering iron) to something like this: [MEDIA]
Watch Sanjay's face when Josh says it (6:09).I'm fairly sure that microexpression means:[MEDIA] :)
I was planning on using the Zesty Nimble which would allow a smaller carriage.I think a redesign of the Y-axis tensioner would be needed as...
I mean keep the Z axis as is and rotate only the heated bed and glass, The Z-axis platform would have to be modified to support it and the Y-axis...
Have you considered rotating the heated bed anticlockwise?It will obviously involve some modifications but you wouldn't need to modify the...
Probably only good for very small parts.
Interesting, but is it controllable?Would you need a pump for each head?
I was thinking of a simpler adaptation where we would gain 50mm each side for either IDEX/ooze buckets or just a larger build plate.The back top...
The significance of the bed orientation hadn't sunk in with me until you mentioned it!How hard would it be to re-jigg the BigBox to "borrow" this...
The air will exit parallel to the build surface so should not be so different to the current design.[ATTACH]