Separate names with a comma.
Sorry not sure if the title is good.... how do you call the plate above the bottom? Anyway this is what I have done... I used some M4 screws (be...
I print @Chase.Wichert Titan Dual Direct Drive and I want to share my progress and settings, So here S3D is used on thingiverse 1st part done...
Hi, I wanted to know what kind of duct tape can be used with PLA filament like "E3D Everyday - PLA - Silver" I printed various wall mounts and...
Here I will collect BigBox firmware tweaks I'm using, maybe this is interesting for others too. Note, I'm a KS backer so I started with BB1.0 Dual...
So there is that option in tune menu if it is enabled in Configuration_adv.h... Since Marlin is not the best in documentation I assume this option...
(This is kind of solved by using Alex9779/BigBox/Dua/RC_Hybrid_Titan_MBL) So finally I'm in the mood and have time to finish my 1.1 Titan Dual...
and all I got are some calibration prints.... Ok no but a lot of those :D Some here https://goo.gl/photos/riLuvgkffxdz3uxU9 and a lot failed once...
Little guide how to rescue a thermal runaway print: If it is still stuck to the bed So your print stopped because of ... the fan argh!!11!!1. OK...
I made a temp calibration test like this guy And I get this nice skyscraper.... but I did not expect to get open windows ;) What is causing then?...
Hi I made a Nut trap holder http://www.thingiverse.com/thing:1479695 These are meant to be installed permanently with glue. If you scale them a...
Hi, I have some trouble...... with bed adhesion and or first layer. I print with PLA 1.74 (messured avg 1.71) from Multec on a BB Dual . 210°C /...
I have some issues for one how or where do you hold when pressing down the filament lever thing which presses the filament against the Stepper...
I'm the only only one with 0.25 nozzels? (BB Dual)
Hi, When I move my Z axis for 10 mm it only goes 5 mm.... so what is wrong? current 1600 steps/mm or micro stepping (need to check)? What should...
Hi, I'm on set Power On and I do not have a Z Offset menu point in the Control menu.... What did I do wrong? Oh I have a BB Dual... bye
Just a question, I'm connecting the Rumba to the PSU... here in good old Germany we have law or something that you are not allowed to have tinned...
