Separate names with a comma.
Well i think this is my 1st fail point.
Stopped mid print. Now i cant get my hot end to temp. :(
i did that and it seems to keep one height but so far only printed from pc is there steps online to update the pi?
i am at 1.1.0 is that the one or are you talking about 1.2.0 https://github.com/MarlinFirmware/Marlin/wiki?
also i dont know if i said that i...
if do a auto home and a bed Level it changes my Z offset i have moved this offset so much now i cant even say where it should be but it...
I know the 1st layer is hard to get but I am using a 10MM X 10 MM X 10MM. I was thinking there was a problem with slic3r so I moved to Simplify3D...
Email me a box. Please!
It's like it just stops and makes a hole in the boat.
It will complete the print just has a hole. I don't know if it can bridge yet I...
Found the problem! It was me.
The End stop Switch was in the wrong place in the rumba it was X max not X min
Auto home not working the X travils in the direction toward the side that has no switch and I shut it down.
Well I flipped x for y and it's still in the X not the cables. Got to be a setting in the card or a bad rumba.
ok going to prepare, then move axis, move 1mm,
Now if I pick x I move +oo8.0 when I rotate it back to zero I have no movement back.
If I do the...
I just put in what shipped with the big box all the other heads cables fans heaters wires are to short.
I was going to do the valcano.
I have 4 heads and 2 heat sinks is that right?
ok I got the pro kit but also got a V6 kit and a cyclops what was I thinking...
Ok so the V6 power pack had this in the bags see photo.
I work on industrial stuff for the big 4 and if you drill a hole then use lock tight it might take a day but the holes explode.
I have never used...
Good call I did read most of it but with out parts I got lost. With all the parts on hand that what I would do now.
Dont let the blue lock tight touch acrylic parts or any color it will find any imperfection in holes and expand cracking them. If it was me i...
why is that usb header 180 out is that the cable then?
Microbarb Brass Inserts
I did not drill in to the photos as it was not needed until now and installed the wrong microbarb...