Separate names with a comma.
@dc42 Do these Toolboards support Pt100s natvely? Also, can you run m303 commands to tune the heaters on these? Will there ever be support for...
Instead of computer vision, I believe two Laserpointers and two photodiodes should also work for X and Y after z has been calibrated and also be...
I got two of these myself. On both of the shells with the male pins in them I had tolerance issues with the bores for the worm gear bearings. Had...
@mkudzia By the way, I just noticed: you have also uploaded your config.g.bak to github. It still contains your Wifi SSID and password - you...
I was playing around with different sequences to calibrate docs. Also, does it really seem that unlikely that this sequence could happen in a...
Love it - the noise was one of the biggest issues my neighbours had with my Toolchanger. This solved it perfectly. Only thing left do do is to...
I just noticed that when I do the following, my Toolchanger gets confused: T-1 T1 T0 T3 . . . After the T0 toolchange, it just puts the tool...
Oh sorry, I just assumed you had, because you mentioned printing in PEEK. My bad :D
I don't know how far these fumes travel, but until you have all the data, I think it would be wise to also advise against the use of Threadlock in...
If it really is the threadlock, what does that mean for systems that are already contaminated? No panels whatsoever? Or do we need to disassemble...
And that is, what clever people call upselling. Also, I seem to remember you saying in some forum thread that the Toolchanger wasn't designed to...
I don't think so, you guys bring it up quite a lot in the manual, even going as far as to remove already installed screws in later parts to...
Thanks alot, you just saved me an afternoon of playing with calipers and set squares
By the way, has anyone already made CAD-models of the Panels and is willing to share them, just in case some of us wanted to make replacements...
Finished the build of the Toolchanger 3 Days ago, and I have a total of three hours of printing time on the machine. No threadlock was used...
Well I am in the exact same Position as Nibbles, I have both filled out the form and written an email to the abovementioned mailadress, both more...
