Separate names with a comma.
I've now resolved this issue - I'd forgotten that the Z height calibration script needs to be run multiple times to really zero in on the correct...
Hello, I'll start off with a little context. I have an E3D Toolchanger with a Hemera extruder. Originally I was using a V6 hotend with a 0.4mm...
I'm assuming it's RepRapFirmware V2, the interesting parts are: M307 H7 A-1 C-1 D-1 F45000 ; Disable Heaters for use with PWM M305 S"ASMBL"...
At a high level, the belts start at the front of the carriage, go around the front idlers, around the back idlers and motors and to the back of...
The belt paths are around 2m each (A little over to take into account the path around the motor pulleys and the fastening of the ends) - I'd...
Which model did you use? Is it a clone of their upright, cylinder or hand-held vacuums? I noticed that you have an enclosure on Thingiverse which...
I'm still waiting on a collet so I haven't put it on the printer yet. My testing was performed using a standard RC servo tester (ToolkitRC WM150,...
The parts lists are in GitHub: https://github.com/e3donline/Motion-System/tree/master/PDFs The Z axis...
Quick update on the iFlight SucceX 50A V2 speed controller and the iFlight Xing 2806.5 1300kV motor as I've just received them. Just a quick...
I was initially planning to use one of these RC battery eliminator circuits to convert from 24V to 12V, however I'm not particularly happy with...
I just wanted a quick print, so in this I'm using PETg (spoolWorks Edge), pressure advance is calibrated but I haven't calibrated my temperatures...
On the subject of tight hex screws and soft hex keys, I usually use the hex screwdrivers made for the RC model industry - I find that they are...
Which model did you use and did you print any parts to mount them? Do you have any pictures showing the mounting locations and cable routes? The...
[ATTACH] I would have prefered plug-in connectors for everything personally especially given that they have been used on the main / expansion...
Oh that's a shame, I thought they would have been fine especially with the metal strip as I'd seen connectors like that on the early tool changer...
Here's the relevant page detailing how to check, essentially there's a problem if the gears are loose on the shafts:...
That looks great, especially if it was in TPU. You might want to terminate the metal strip at the plug rather that on the tool so that it's...
Digi-Key aren't the best for pictures of their products and sometimes don't even bother to upload the relevant datasheets which is annoying, but...
Oddly it looks like the Micro-Fit 3.0 connectors are rated differently depending on the standard, for IEC they are rated to 5A per pin. (120W @...
Some of the original tool changer pictures showed connectors (Molex Micro-Fit 3.0 I believe) but sadly for some reason they were dropped from the...
