Separate names with a comma.
https://github.com/BigBox3D/Marlin/tree/Hybrid-Dual You will also need to cut the frame 10mm deep along the right side of the top frame. And...
This is a commercial injection moulding machine drawing. for reference.
Just out of curiosity . . Would it work if I made a cast of something (like a extruder print head part) out of the water soluble filament like...
I agree with a-dragon-in-a-pie-costume. The S3d raft starts its base layers much thicker than your common layer settings, So having not enough...
Ive updated to the e3d firmware release for the BB Hybrid Titan dual https://github.com/BigBox3D/Marlin/tree/Hybrid-Dual and I get a pleasant...
The stock settings, are a good base line, Im just tweaking them at the moment for the volcano. But its all good, apart from the initial scary ending.
So I updated the Simplify3d to the latest version. did a clean install and selected e3d bigbox dual. All Done (or so I thought) Im no expert but...
Here is a link for the latest design of my filament jam sensor, [ATTACH] I have exhausted my knowledge of coding on this one, and I have simply...
My print was set up with .4mm layer, 1mm extrusion width, abs temp set to 235c. With 15% infill. I now have it set to 2500mm per minute. And...
OK its solved, not the printers fault, but mine. There was too much overhang on the print, so all I did was increase the amount if support, and...
Ok, Ive slowed the print 80% and its working. I didnt factor in the Filament extrudate flowing so fast it was acting as sort of a coolant. even at...
I am using the Volcano, printing with 1mm nozzle, 0.4mm Layers, And NO FANs. But I am still getting a thermal runaway!? I am using the Volcano to...
I'm not sure if this helps but my starting code for simplify3d is included to see if it helps. I was having levelling issues and I found when I...
Ive found the box to be a good improvement, The ABS is sticking and not warping as much = Not as many failures.
Thanks, its just that I have different materials in each extruder, but when I only want to print with the one in the left side (Tool 0) the right...
Hey E3Ders, I've successfully set up the BB Dual Nozzle (Octoprint> Tool 1) as the main extruder, And It can print well on its own. (I love the...
I've been experimenting with Black Verbatim ABS also, So far this is what I've found. 1. It sticks well at first, but as the print progresses it...
Something fishy there..
I am trying out a more detailed print with ABS and no supports. Ive used Painters Tape because I couldnt get it to stay down. And remember to...
