Separate names with a comma.
Thinking of building one to replace one hemera tool (which give me headaches) Do you have pictures of any prints and settings to share? Regards...
Hi it is I was relocating from London to Munich - please provide more details. Single error message is not enough - whole output would help.
Hi, no - not really but it may be related to the order of extruders/materials. I will check that code later on and have a look. Might redo the...
This was an issue (buggy prime tower optimisation) this has been fixed.
New release (anyone who forked please do a pull) - Added heated bed temperature control. PrusaSlicer would assign sometimes assign wrong...
Maybe, sadly I don't have a mac to check it....
Fixed, stupid coding error - master branch updated ;)
Yep, go 64 bit The memory managment in it is not the most efficient (but fine for most prints) 2GB 32bit limit is defo not enough :) Also update:...
@Nibbles The tiny tower temp not dropping is a feature. Basically my temp optimized is build the following method: - Set the IDLE tool temp to be...
@Nibbels Fixed the issue with prime tower optimization Wrong condition was used - and as such it was too aggresive(BROKEN) Please pull the...
Hey, pushed newer version of code - with some fixes including the default tool handling (PrusaSlicer doesn't add T0 at the beggining if the print...
Hello, I will have a look and let you know :)
I need to check on the gcode file if this thing on S3D preview is A) issue with script where it skipped layers (bug) B) issue with S3D preview -...
This looks legit as - if you notice this irregularity corresponds to Support layer irregularity - this is related to the fact that Prusa slicer...
[IMG] [IMG] [IMG] [IMG] The doors for Bell 206 printed with ASA and HIPS as support
Hmm, this gap shouldn't happen! Mind sharing the 3mf file and the gcode file so I can troubleshoot?
Ok had a look! Right! - yeah might need to add more error handling - but annoying thing is bloody PrusaSlicer just bombs out if the script exists...
Check my thread - PrusaSlicer post processing script that adds: - Purge Tower optimized for tool changing - Smart idle/active tool temperature...
@Nibbels The script can be found here - the PrusaSlicer settings are in documentation/README.md https://github.com/mkudzia84/toolchanger-pspp
Thanks, Will put those STLs in my repo/thingiverse soon And - print is PETG with PLA as supports - PETG + PLA with 0.0 distance between supports...
