Separate names with a comma.
I can not help you with any config examples at the moment as I started modifying my BB last year and realized I needed a printer no 2 to modify...
https://e3d-online.com/leadscrew-motor-with-pom-nut
Personally I would overhaul it. But It's a drag to modify because of the acrylic/wood frame. And the electronics are not readily available. If you...
The X motor mount and idler pretty much done and next would be printing them. Also finished the base of the x-carriage and mocked on the main...
Hi, I have not had much time the last years to do anything with my BB. I hope to get some done now. There was so many cool mods for dual and IDEX...
Thanks Larry! Good to know.
I have asked this once before but can anyone comment about the stiffness on this rail compared to the original two smooth rods? My primary...
I have a spring underneath the cork to push the PCB against the alu bed. But 120C was not enough. It came of pretty easily. I have read that...
Testing some PC-ABS I actually got a sample of when I originally got the BigBox 1.0 KS (late number). I had to put a cotton rag over the bed to...
Quick vid of pushing a 0,4 nozzle. Print width 0,6, thickness 0,4 speed 80mm/s at the fastest. See at 36 seconds for fastest movements. [MEDIA]
My second print testing thin large walls came out pretty nice to. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Finally I'm printing. Juggling family life with work and 3d printer mods has been a slow process. First print is a Benchy scaled down to ~60%....
@GrodanB, you can't go wrong with lithium on the lead screws. Should help against any oscillating vibrations / screeching.
I have a question about the torsional stability around X axis compared with the the two smooth rods on a stock BigBox. I will be using a dual...
That's the route I'm going :D @spope I'm converting to Zesty Dual Nimble to use a Chimera with narrow footprint. Just because those other...
I have had the IR towards the hot-end for some time now and it keeps accumulating micro dust particles or some residue from melting plastic. A...
There is no way to get titans as close as 18mm between filament output. So you have a few choices. Hybrid, one extruder on the x carriage and...
Any mod you could do will take more than one hour. Optimising the print settings as mentioned here is the quickest solution. But a mod to...
Sigh.... I like the design! I like it so much I might adopt it for Dual Nimble and Chimera. I thought I was just about finished with that...
Only 5V and GND are the same. https://forum.e3d-online.com/index.php?threads/bl-touch-auto-leveling-sensor.1781/ PT100 as wired on E3D BigBox...
