Separate names with a comma.
It is a BigBox dual (version 1) So if it is no problem to wire 2 fans on 1 port, then your suggestion is the one to follow. Thanks Karel
What is the best way to wire the printcooling fan of the 2nd extruder on the duet WiFi? The duet is short of the 2nd regulated port, or am I...
Yes, I saw the schematics, did some test and came to the conclusion that the rumba is beyond repair. So I will replace it with a Duet WiFi....
Well, it is odd, but it seems that de A4988 boards are OK. I swapped the extruder1 driver board with the X-asis board to check. So the damage...
So I hit the jackpot... :mad: I might as well replace it with a Duet WiFi then. One other question: there is this print that I need finishing. Is...
Great tip, thnx. (Should have thought of that myself...) So the steppers are ok, but it seems that the drivers are the culprit. Does that mean...
Thanks for chiming in. Yes, both extruders are heating as supposed, but the steppers are not turning. They are not getting hot and are completely...
Hi all, I have a problem with my BigBox dual, where both extruders stopped during a print. There was no clogging or related problem, just both...
Yes indeed, I should have mentioned that. Printed with the 0.4 mm nozzle. Standard PLA at 190ºC (first 3 layers 195º), bed at 70ºC, fan on at layer 3
Happy how it came out. Hippo height = 45 mm [IMG]
If you live not too far away from me, we could have a look together what's the issue. On my BigBox PLA is behaving 'normally' :-)
Well, I am measuring a resistance of 2.2 Ohms at the end of the cables with my Fluke. So there might be a problem here. Anyone from the team that...
Thanks. As i see it correctly the bed should be 2.8 ohms. I'll measure it tonight and keep you posted.
Yes, I know, but that doesn't explain the temp difference... :confused:
I finished my printer and the bench came out perfectly, so I am very happy with my BigBox. However, when i try to print something larger, the...
Arghh, spotted my mistake. I overlooked it several times while checking, but I had the L and R Y-axis rear brackets mixed up. Story of my life,...
I am currently building my BigBox and before proceeding I would like to check with you if my current assembly is OK. My X/Y axis are not level...
