Separate names with a comma.
Anyone got a firmware config for marlin 2.0? Anything I can find using google is 4-5 years old.
Been printing fine for several hours with my bigbox pro. But today when I started a print I noticed nozzle was way to high. So I adjusted Z-offset...
Wow, what a difference it was with a Astrosyn on the Y motor :O Perfect!
Please delete.
Now that looks way better than what I did hehe. Great work :)
Hi I have had some strange issues with my BigBox Pro for a while. I've just recently upgraded to 1.1.0 RC6, and problems still occur. I also...
I used a smoke alarm module from ebay, and a nexa remote kit. Just hooked up the remote to the smoke alarm module. And attached one remote-socket...
Which of the firmwares on GitHub contains all these fixes? Reversing the wheel, and such. The one I found for my pro Marlin.Pro.hex didn't...
Suddenly my Pro will not wait until bed & extruder has reached temperatures, it just prints right away after it's home and level procedure. I'm...
So. I started this print which kind of failed, had played around with extrusion multiplier i S3D. And I stopped it from the menu of my bigbox....
Thanks! Gonna try out the mesh leveling soon.
Which firmware for a Pro non dual?
Fusion 360 is free? From what I can find it's a trial then 25$ each month. I'll give it a go anyway :)
Warping on HT vs ABS I'm not sure of yet, only had it happened to one part, but that was printed with 110C on bed instead of 120. I think I need...
Yeah, I'll keep these in spare, until I see deformation on the stock ones. But I'm not 100% sure HT is better than ABS at heat resistance. Maybe...
[ATTACH] Second print came out nice too :)
My fan won't spin properly until I set it to 40-50%, and at those speeds it's quite effective. Alot wind around the nozzle :)
So, after some testing and failing I got my first successful print using HT filament from Colorfabb. Settings used: 260C on extruder 120C on bed...
Also had problems with thermal runaway when testing Colorfabbs HT filament, extruder was running at 260C, and default fan settings. Had to set fan...
Testing stuff here, and found my sweet spot for this filament to be 92% flow, but I've changed it back to 100% flow and instead decreased E-steps,...
