Separate names with a comma.
Yeah the upload must have failed. I compiled and uploaded through the arduino IDE and now shows the correct version number. Tho the logo is garbled.
Hi I just tried flashing it to my Bigbox Pro (its been a while since I have used it last.) The version number at start up still says "1.10 RC3" I...
Already done the cable, amplifier, and thermistor checks. Thank you, it is the rumba board then :\ after changing: #if TEMP_SENSOR_0 == 0...
I get error maxtemp when I have two pt1000's connected to my rumba board. It is nothing to do with cabling as far as I can gather, as when the...
First of all thank you Tom De Bie. I have modified your file to fit my version of chimera along with a basic cut up x carriage top. Its not...
Maybe make sure that your stepper driver is delivering the correct current and that everything is aligned with the gears? Been using my titan as...
Hi I've just purchased a titan with all the bells and whistles, I have since become aware of the 3mm filament issue (originally from a review...
looking forward to someone making a chimera mount will the e3d team be making one in the future?
Found a bug where after a successful print the "mesh level bed" settings and "Bed Z" setting are lost - luckily you can go into control => load...
Hi metajack really appreciate the work you've done :) One small change I noticed should be made note of is on line #675 should uncomment if you...
Yes it is the X axis motor I'm wanting to change, to one with a lower mass version, however I'm having difficulty finding one with 400 steps per...
Its actually the jerk setting I'm trying to improve, I'm thinking if I can decrease the mass of the carriage then I can decrease my jerk values...
Hi I'm trying to decrease the weight of the print carriage. I've printed the 1.1 version hot ends and am using my bigbox with a Bowden set up...
I recently purchased some sorbothane feet for my bigbox and I have to say it has helped alot in cutting down vibration
Have you heard anything back from the creator about any progress?
Could you post your code of the changes you've made to enable mesh leveling?
Hi I've been playing around trying to get my prints to work - realising that print surface being perfectly flat is the key to successful and good...
https://github.com/Alex9779/Marlin/releases/tag/1.1.0-RC4_BigBox_Pro This firmware throws up : Arduino: 1.6.8 (Windows 7), Board:...
To be more specific, I've tried these: https://github.com/Alex9779/Marlin/releases/tag/1.1.0-RC5_BigBox_Pro_MeshBedLeveling...
For RC3 I'm using: https://github.com/joshuarowley42/BigBox-Pro-Marlin For RC5 I'm using: https://github.com/Alex9779/Marlin/releases/ Steps for...
