Separate names with a comma.
Thanks for the picture, I was wondering why I had an extra short blue neutral cable... That picture in the instructions really isn't great.
The acrylic panels are actually closer to 4mm in thickness rather than 5mm... I just had ordered the panels without measuring the originals...
Replacement acrylic panels from E3D arrived today, will be swapping them out over the weekend. I also received some 6mm aluminum composite...
What happened to your Z-Axis?
I do have to give kudos to E3D Support, they're sending me replacement acrylic panels. So my first priority will be getting the printer up and...
Not so difficult, take the back panel off, take the top plate off. Loosen the screws for the electronics panel, and slide the entire panel up and...
I had some thoughts of setting up a digital indicator up against the edge of the top plate, and seeing if it deflects under heavy movements....
I'm using the Duet Ethernet.. but if I were using the Duet WiFi, it now has an option of an external antenna. Could have gone for aluminum...
I think it's going to look spectacular! But looks are secondary, the CF panels will be all about the stiffness. Also will be adding handles to...
I'm going with 5mm carbon fiber panels! Placed an order from China for 5 panels of 5mm 500*600mm 3k glossy carbon fiber, it'll be here in about 2...
Also, tell me I'm insane for considering carbon fiber panels as a replacement? ... I'm considering 5mm carbon fiber panels as a replacement....
I had the same thing happen with mine, I used generic 242 locker on the bolts on the ends of the extrusions and it seeped out and cracked the...
Adding a note here to follow up on my Twitter post, I am getting some Loctite 425 which is superglue-based and designed for plastics. Amazon...
