Separate names with a comma.
I have SuperSlicer working great now for single and multi-extruder prints. For activating tools I have a macro that calls T0 P0 - T3 P0. To...
Mostly I have been leaving PrusaSlicer set on RRF/Sprinter and it has been working great. But, it doesn't use G10. So, I Started playing around...
There is folder in the thingiverse download with a nice set of pictures that show the process though. Does anyone here ever really RTFM anyway?!? ;)
I bought multiples of some items like belts, bearings, gears, bits etc. Including the CF-PETG i think i probably spent around $200. Had to have...
I’m ordering all the stuff on the Bill of Materials. Im confident by the time it all arrives and I get around to printing out the parts more info...
Paul That's what I was referencing that needs to be changed. The code you posted has the same switch defined as both an endstop and a probe....
Correct it is not TC specific. Under RRF2 the probe could be defined as both a probe as shown in the M558 command and as an endstop with a M574...
I updated to RRF3.1.1. There is a good amount to change but I did not find it that hard to do. That being said you need to have good attention...
This is what I did as well. Cannot speak for S3D but this works perfectly with PrusaSlicer. The fan speed is modified by Gcode and the next tool...
Where to begin... The toolchanger is an awesome piece of engineering. I almost find that I enjoy tinkering with the hardware and software as...
You are tuning the X Y offsets of T1 T2 and T3 in relation to T0. So you print the tool calibration print and use that to adjust the numbers in...
Awesome!! How are you calibrating the cutting head?
The user interface options for unchecking the run macros have not been added to DWC2. You can select the tool and enable the heater by running T#...
Now that I have the bowdens reasonably tuned in I’m considering doing this aero upgrade. Really wanted to add hemeras but still not available and...
These bolts were loose on my TC that I just got last week. I had near perfect level after assembly and suddenly switched to +.25 / -.21. On...
