Separate names with a comma.
They are included in the s3d factory file
Hi, I ordered all the parts for the ASMBL Tool. But I wonder how to realize the power supply. The ESC only supports up to 3S (12,6V). The Tool...
I already tried different fans. Same for all. But I have an idea: If you place a magnetic metal sheet (around 1mm thick) between the fan and...
I do it the same way Then E3D should correct their data sheets :)
Some one have issues with the magnet? My tool is too heavy
As soon the fans are not centered to the motor they are working
I use use the same as you. But how do you handle the switch the speed by a tool change? Do you completely handle this by tpost scripts? Would...
Hello, I read the data sheet of the tool changer an saw that the movement parameters are defined as followed: Movements & Accelerations...
Hi Stefan, I also head similar issues. First I thought that my linear rail is bended. But my main problem was that I fixed my heatbed screws...
I used the same fans.
Do you have a solution for a part cooling fan?
Do you have no problems with the fan attached to the motor? Also tried this on my titan aero tool. As soon I place the fan centrical on the...
So I was a very ambitious user of simplify 3d for years. Also used it for the Tool Changer. This year I switched over to prusa slicer. And the...
The main problem why I can not use Cura for the Tool Changer is that Cura always for a Tool Change command (Tx) before homing. Not matter whats in...
Hi together, I have designed a tool calibration station. It is equiped with a raspberry pi zero/camera and a hight sensor (guided platform which...
Tried it today in the chat. They told me that it is not sold separately
This is also the way I have leveled my bed :) To e3d's defense, I don't have a metal Z-NUT-BRACKET. I printed it from carbon fiber reinforced...
Hi, I want to know what are your maximum deviation after bed leveling? As the cantilever tend to be a bit lower in the front part of the build...
Where can you by the reveiver and the docks?
yes this would be the easiest way. I will do the cut out also on the other side in the elec panel. And will turn the z motor. The other cut out I...
