Separate names with a comma.
I used the same coolers you show here on another printer. The great thing is that they really can put heat away and the water tubes are very...
I did reslice my current project with the new version and the print is ongoing. Rightnow everything seems to be ok. Some detail about the priming...
[ATTACH] Especially the last part: Thank you! I will test this tomorrow.
I got this error just now, after the update. [ATTACH] I did activate Debug = true to see this. -> [ATTACH] I did then comment...
Thank you so much for your replies! Ok, one problem is the bed! I did not see it, it would have been easy to check. Totally loose. 2cm before...
Good evening. I did not want to write much this evening. So I made a unlisted youtube video. The main problem is not the broken priming tower :D...
Today I saw another error. [ATTACH] I wanted to slice this raven: [ATTACH] [ATTACH] [ATTACH] Python always crashed because of a memory limit...
Will there be a non pancake version of this model? + Fan?
Yes, it was not programmed by Repetier / Conrad Electronics initially so I implemented it by myself. It was hard to understand and do but I...
This is a very interresting topic. My other printers are quite stiff and heavy machines. On them the movable bed = y axis is ~1.2kg stock weight....
In comparison to my old printers: The consequence of having a single z probe as reference is that I first probe my Z origin at some specific...
I finaly bought a set of Winsinn's two days ago. Prior to now I did not have any part cooling fans on my tools. I tend to change that now:...
I use RRF3. 3.1.1 My config files are located here: https://github.com/Nibbels/e3d-toolchanger-config But please note that I only use 3...
I wonder why your file is in "Appdata/Local/Temp". [ATTACH] Do you instantly upload your gcode to some board? I save the file so some folder like...
Again it took some time to figure out other problems but the post processing works now. I still see two things that might be worth a discussion:...
Thank you alot! I will do other tests the next days and report back to you.
Hello Stefan, I did fight with similar problems. First: The frame is only stiff enough when the side panels are mounted. Otherwise the printer...
Hmm, on my machine the position is nearly korrect. +-2° maybe. I do remember some weird things ... ? As I remember it, I could have made two...
My pictures are atop. I guess there should now be some footnote on them: I had some software problem while I fixed the stiffness in that way! So...
Hello there. I suppose some of you can continue reading here: # https://forum.e3d-online.com/threads/layer-heights-different-between-tools.3637/...
