Separate names with a comma.
Not sure it is the best advice, but 220 seems a bit hot for PLA. Personally I print PLA at 190 (but I admit that I'm not a big 3D printing expert)
I did not. And to be honest, now that I have ,I'm not sure to be one step closer to the solution. Not that it doesn't help, but it is way above my...
Ok, I think I have two (maybe unrelated) issues. First let me say that everything was working fine for months until recently. The first issue...
Don't worry, it helps a lot. It confirm that with my poor 3D printing skills I won't be able to make it work (at least not in a short time). I'll...
So, in the end, did you manage to have something that pleases you with the 1.2 nozzle ? And can you share your results ?
And that's it ... the extruder is one of the 1.8, and my two Z axis are the two remaining 0.9 ... How lucky I am that I only need to move four out...
And I think I found where my problem is ... the motor on the Y axis is a 1.8deg/step one, instead of the 0.9deg/step as found in the plans. Now...
They are at +180.00 so that's not it (But thanks for the suggestion).
Yes to both questions. Home is at the correct 0,0 mark (front left), and both the endstops are triggered when returning to 'home'.
I have the same issue so I'll stole this discussion to talk about it. The symptoms are the same: During the bed levelling, the print head try to...
Just received the long awaited mail. Backer 399 here. So we now enter the realm of the 400+ !
