Separate names with a comma.
What are you printing? PLA? What are your retraction settings. I heard a crack followed by a clog because my retracts were too ambitious for pla....
I actually didnt do much from the default settings. I have linear advance enabled so I disabled wipe. Extrusion width 0.45. Extrusion multiplier...
unfortunately not I had endless issues with cura once I switched to prusaslicer my life has been a treat
Sure what settings would you like to know exactly
I usually dont change filaments much as I post process my prints. But when I do I generally heat the nozzle and pull it out. Note I am running...
Awesome! glad to hear you are sorted. Next thing is to upgrade that mainboard! I personally like the skr E3 mini for the ender. It ticks all the...
There are a few printable ones that you can use. I use the one on myminifactory but I run bltouch with it.
So I take it you have defined the steps per mm on the screen post clearing the eeprom etc? You need to save the configuration post updating the...
Have you heated up the hotend to above the min value in your firmware? It will not extrude unless the hotend is heated to this
how tight are your wheels on the extrusions? It needs to be just tight enough to not wobble much if you over tighten and it slides with some...
Yup I have it running. I can probably share my firmware with you. it is amazeballs just got it dialed in and its perfect. What I will say however...
I need to revisit this now as i snapped a part on my work horse printer? Anyone keen to comment what they think the problem could be? Someone else...
[ATTACH]
Ok that wasnt it still get those weird layers
Now this is interesting i measured the extruder filament width and its like .5 mm instead of .4 i will be running experiments with the nozzle...
15mm/s i think is quite sufficient for flow to keep up. I do not experience any adverse flow issues as this would present itself across the whole...
So I am thinking I didnt quite explain this correctly. It seems that during moves between areas of the print when the extruder starts the print...
Will give it a shot. Note that I have 8mm leadscrews with 8mm pitch so my steps are set to 400. Do you have a different value calibrated?
ABS and PETG.
Will have to run a print tonight the pictures I had of things I printed recently dont really show the banding. Its pretty much still printing like...
