Separate names with a comma.
Try deep breathing!
"Installing it at the back causes issues with the cable rotating at its "pivot" points." That's where you said it was a problem.Also here
Doing your test with an actual Zesty Nimble shows no discernible movement of the hobbed wheel. Flying extruders and gimbals are far from the norm...
The internal cable doesn't rotate dependent on the position of the head or at least the effect is inconsequential.Can you point to anyone who has...
So what " issues with the cable rotating at its "pivot points" are there?
The hobbed wheel is driven by the internal cable the outer sheath is fixed at both ends Does the cable rotate any more than a bowden tube or power...
Why would this be more problematic than the bowden tube or power cables in a direct drive set-up?The Zesty site shows multiple locations for...
Why would this be different from a standard Nimble installation ?The Nimble will be moving in X and Y just as it does on most Cartesian...
Somebody's Lost in (cyber)Space?
It's the https://wiki.e3d-online.com/Single_&_Dual_Direct-Drive_IR_Sensor_Bracket
That only shows if you order more than one???I ordered anyway and had an email saying that they have shipped:confused:
I think the nuts are back on the menu!
(there is no "out of stock" message).
Use a larger nozzle.
If you are building from scratch you could consider rotating the heated bed 90° to give more room, rather than redesigning the frame.
I don't know if will be any help but I had a problem with the sensor,it would react to everything but the glass bed.I eventually solved it by very...
That's the camera cable.
Here is the link to Dave Crocker's Troubleshooting page:
It just seems like you are building a 3d printer minus XYZ control, when what you need (as far as I know) is the equivalent of a welding rod and...
Have you considered friction welding?
or adapting a heatgun or similar (maybe a soldering iron) to something like this: [MEDIA]
Watch Sanjay's face when Josh says it (6:09).I'm fairly sure that microexpression means:[MEDIA] :)