Separate names with a comma.
Hi, Where can I find the latest working firmware for BIGBOX PRO? ... or there is not any new for PRO? I can only find documenation and new...
I just wanna say that I got a new PT100 by snail mail and now it all works! Thank you all for the help!
I can't finger tight it att all. It's loose in this end. If I shall finger tight it the heat zink and heat block will come together and that was...
I found the error. I have not mounted the extruder correctly! I rebuilt it and started to print but it started to leak filament between the...
Old_tarf: It's a PRO and not a dual BB so most of the hints from you can't be done but I will try to test the last thing (Use the second heater...
I have tried Everything now (I Think :)) but with no luck. I have tested the Heating-cartridge and the PT100 as good as I can and they seems to...
Support have sent a new Heating-cartridge but I have not got it yet. I did order another one from a Swedish Company 40W/24V 6x20 and tried it with...
Should I get RC4 or should I stay with RC3 on my PRO?
If I pull the knob to fast when I manualy move the bord in z-led the z zero itself.
So there are no cure for the Z-problem?
Pro
Should I upgrade the firmware before I print my first things or should I wait until I know it worked with the original firmware?
Thanks for the help, Support next....
I measured the recistans and I got 74.5 Ohm. Is that the reason that I can't reach more than 100 deg?
I am on the Printer Commissioning part for my new BB and I got an error when I try to heat up the nozzle to 285 deg. It goes slowly up to 100 deg...
Beställt en vanlig BB (ej dual) på Kickstarter. Fick den idag men upptäckte att en acryldetalj var sönder plus att den första delen jag skulle...
