Separate names with a comma.
Direct drive Mosquito Tool ready for test
[ATTACH] [ATTACH] [ATTACH]
How about a Airbrush nozzle? It's thin and long..
Yes, i milled it by myself.
My Toolchanger is made complete by myself. I never had acrylic plates on mine, the aluminum plates are milled...
I tested this with SLS Printed Parts and machined Parts. The machined part is stiffer, so it can print a little bit faster.
I do, what do you need?
The Switch is a Omron D2HW-C201H
Replaced now the Bottom Plate with a 10mm Aluminium Plate, adds a lot more torsion stiffnes.
Oh thats a Bug? Will there be a fix for RRF2.x? Or should i go to RRF3?
Move to Dock with tool attached is with G53, that ignores the tool offset.
The movement came from the Tool offset i think. No offset in config.g, no weird move. M400 at start of the tfree.g and tpre.g files solve the...
The first time I wanted to build the Sysem original.
But I'm going to make a new base plate that will also get thicker. I think this will make the...
On my DIY Motion System i only use Aluminium Plates because the Acrylic sheets on my previous cheap china Printers always break after a while....
You can see it here in the Webinterface
Is your Z-Endstop working correct if you push it by Hand?
Whats in your homez.g? Move the Z-Axis the right way if you move it with the Buttons on the Webinterface?
How fast can you print with the Hemera? I got ringing and ghosting above 40-45 mm/s. With a Direct Drive Tool that have the...
Can you share the holder from the Paneldue Case to the Profile?