Separate names with a comma.
Can't see how to delete or remove this post. Printer has now been sold. Thanks, Pierce
Hey All, About to move and no space for 3d printer, is anyone on here interested in buying mine? White acrylic dual 1.1, started an upgrade to...
I'll take a look at the new firmware with that feature, although also tempted to treat myself to a duetwifi which seems to be a bit better quality...
I'll give that a go, messed around with some settings but didn't try that one yet. Will be my next test :-)
Hey Everyone, have been trying to print the model below but for some reason the blobs and zits are very noticeable on this. Looking at the...
No problem everyone needs to ask questions and this forum is very helpful! The wiring diagram is here from the wiki...
Max or min temp errors usually mean there is a missing or loose connection somewhere. I would start by just double checking that the extruder(or...
Thanks for your tips gentlemen, the extra bit of tubing in the feed in seems to be doing the trick and makes things easier to boot when changing...
@Spoon Unit that last pic is a trick of the eye, it's just grey filament I am using, the ptfe tube just rested on the top part it didn't go into...
Update, tried several more prints and got another one running. 2 hours in it gave up. The bearing piece is worn on the inside to one side so have...
Hey All, Been having and issue of late, using a bigbox, its a dual hybrid titan. I think my bed got out of alignment, the print way too close,...
Yup, had same it was the mirrored firmware I needed from Alex's repo. Although my issue was back alignment and it hitting the case there over the...
I saw the same with mine the other day 4 spools down, but many of the rest of the colours I have are running very low as well! Averaging about 40...
Ah, I really need to learn simplify3d a bit more, you are indeed correct of course, never even looked at that drop down before its always just...
Hey All, Been experimenting with dual printing this weekend. Been using Alex's excellent simplyf3d profiles but they don't seem to have the tool...
My solution is a strip of blue painters tape in that corner, I suspect the light hitting the glass at different times of the day, different lights...
If you have a new version (is it a titan? ) then you need to print a longer arm for it and a few other bits. Otherwise loosen the sensor and...
It's only annoying when troubleshooting because the reset button is hidden under the screen panel! Look in the guide section there is a change you...
Check you pulleys and grub screws are in tight, preferably with thread lock. Also if it's 1-2 hours in check the drivers have the fan pointed at...
I would only say that I love a bargain.... [ATTACH]
