Separate names with a comma.
ASA prints better in my opinion, it warps less and is definitely UV resistant hence better suited than ABS for outdoor use. price is not much...
Hello, I have a heavily modified BB but still using the original E3DV6/Titan/PT100/Rumba configuration. I have ported the BB to Marlin 2.0x a...
I doubt there are any stock BB still out there, there have been a myriad of mods and upgrades published here in this forum. Mine is so heavily...
[ATTACH]
I would share but the problem is that I ditched the frame too, I'm on 3030 extrusions now so my machine shares very little with a BB now. there is...
It is a tough question... There are some nice printers out there for cheap but, if you know deep inside that you will start trying to mod and...
V6 does not like high retractions. Try lowering it and see.
I don’t think so, try higher temperature and no retraction and yes keep it slow but flowing.
That is gorgeous! What are the 2 bottom pics? A render? It seems to have different wheels? Would you share the files? Great work! Thank you!
I change settings all the time but that filament prints well at 200/60c 35mm/s 0.4 nozzle 1.0mm retraction at 35mm/s retraction speed, no...
Nylon extrudes smooth as silk, no abrasion.
The kit is a joy to build if you are good with your hands. All the frame and mechanical is maybe a little over engineered but you will be fine...
Here is one I found on eBay, just search for : “24v 40x20mm blower fan”...
It sounds like you have too much retraction and the hot filament swells and gets stuck in the cooler end of the heatbeak. Try less retraction and...
Make sure the extruder has a tight grip on the filament. That alone solved many quality issues for me.
Yep, that’s it.
All you do for IDEX is use the Xmax Endstop for the right extruder, and E2 for the right X motor. I have both part cooling fans connected together...
This is what you need: [IMG]
I am sure it is possible I did run cura with one extruder only, and bcn3d sigma uses cura with Idex so all configurations are possible under cura,...
Full metal 3030 Idex bigbox with linear rails and direct titans. Printed at 100micron with matteforge pla gray. [IMG] [IMG] [IMG]