Separate names with a comma.
Have spent the best part of today getting back into the Bigbox. about a year ago, the nozzle on my dual blocked; Its taken till today to fit a...
I bought some lithium today, as the workshop is very warm and dusty decided the lithium is less likely to gunk.
i had a couple of ball bearings fall out as i assembled the z axis on 1 bearing. i'm guessing i will need to replace these bearings at some point,...
[ATTACH] where do i need to drop the code into? am i right in thinking after the home all axes but before start printing?
In the commission stage it sets out the routine for calculating the Extruder offset which i have completed fine. mine worked out at T0 X =...
lithium grease seems the best option, i'll get some over the weekend
Seems like a bizarre post, but as it wasn't directly build related, or calibration related I thought i'd pop it in here. Having read many posts...
problen solved, turns out i had a malfunctioning Stepper driver, swapped it for an extruder 1 and it homed perfectly, big thanks to Sjoerd who was...
Have just tried moving the Y axis in the prepare mode, if i select move Y by 1 mm increments it jumps in 10 mm increments. if i move it in 0.1 mm...
its not dissimilar to the problem i'm currently having here...
i have managed to suss a little more out. i have the Z axis homing fine, and the X axis is now dialled in. (it sits on 30, then when you move the...
had another go, hit autohome, it is sat at y=130 x=30 on the bed (left nozzle) but the screen is saying x =30 and y =30 is there a way to tune...
How did you fix the head homing issue, this is exactly what i am suffering at the moment?
Should i try a different firmware if the problem has happened over 2 firmwares could the problem be in hardware setup and not firmware based.?
here are photos of key parts, as far as I'm aware its the hybrid x carriage, and I've used the shorter screw on the end stop. Have pictures the...
i'll put some pictures up this evening
I'm using Alex's bigbox/dual/RC_hybrid_titan_MBL as far as i'm aware i have the hybrid X carriage i ordered my dual in july this year and it...
I'm struggling with homing issues, i haven't got to the MBL as my BB doesn't want to find home. after flashing the firmware i did an auto home,...
ah thanks that makes sense, just found the MBL guide http://wiki.e3d-online.com/wiki/Mesh_Levelling_the_Non-Hybrid_Dual as i am still to...
have just flashed alexs firmware onto the BB, just noticed some variations i wanted to check before i do anything. on the commissioning doc it...