Separate names with a comma.
So i've had my bigbox for coming up 2 years now. It was a home build back at the time, which up until about the last 8 months I have had running...
I have issues with the extruders if they're both not at temperature, have you tried heating both nozzles up and then printing (regardless of if...
I'm having an ongoing issue with levelling the bed of the printer. I have tried self levelling and manually levelling and I'm still getting the...
Hey guys, I'm trying to get the left extruder working but i'm having some trouble with it. I can get the right working and the left I can operate...
Yep, sorted. Cheers for the help.
Yeah, ok that's a much better idea. So to make that work i'd just double what it's set to now? It's 400, so up to 800?
That's probably it then. None of the other steppers I was provided are 1.8 degree; all 6 are 0.9. That seems to be the bottom of it, thanks for...
So i've tried today changing the voltage and comparing an actual measured drop with the LCD measured drop. Setting the potentiometer to 0.464v the...
I still have absolutely no idea why the bed is not dropping. It's working when controlled from the LCD and it will move up and down to auto home,...
I've just tried printing again and it looks like the bed isn't dropping for each layer. I let it do 4 or 5 and the bed height remained the same...
X = 0.569 Y = 0.583 Z = 0.585 EXT 2 = 0.567 EXT = 0.575
Is that the Vmax? If so they're set to; Vmax X=150 Vmax Y=150 Vmax Z=6 Vmax E=50
Is that the correct setup for the Z-axis?
Lead screws are 8mm diameter and Zstep/mm are 400.
If I move the controller anticlockwise the bed drops, and clockwise it raises. The bed is dropping for each layer during the print, I can get a...
I've just started printing the benchy document to calibrate the new printer, however every time I try printing, after the first few layers, the...
Hi, I have got to the final stages of powering on and the readout is telling me that I have a maxtemp error, and would like some advise on how to...