Separate names with a comma.
The Bambu website. It won't work all that well for the E3D TC though. A bit too short.
I recently got a TL-D3 IDEX/Mendel. (Reviewed for the 3D printing Today podcast) I tried to do the same things I did on my TC for this machine...
Yes... Fully configured with Thermistor and tiny heater clipped on is $35. I looked carefully at mounting. I think it actually may be too small....
Brush.g is in the sys directory, but I do not think it is actually ever called. Instead the wipe movements are in the Prime.g file... and it does...
We just received a .4mm fully configured Hotend from Bambu labs (we bought it for the podcast) and I gotta say this is by far the tiniest hotend...
It’s the fan. Sone fans are simply not sensitive enough.
As I feared... lots of testing slowly provided enough info to see the problems... A tiny amount of material does not get drawn up on the...
I think I may finally have sussed it! Sorry if this post sounds emotional. I've been working on this problem for three years!! No more priming...
OK... Now that I'm finally updated... Here's my updated start gcode and it works nice! Thanks DC42! and again... This is for PrusaSlicer. ;...
The problem turned out to be in the homing scripts. Each used the M574 command and redefined the end stops! Why? I don't know! I did not write...
There's actually a number of issues here but the bottomline is E3D is totally dropping the ball when it comes to support for the tool changer. I...
Paul... could you please share your config.sys file?
Well then I guess it is finally time for me to update my FW!
There's 2 reasons why I never use a Prime tower: 1. It can easily get bumped off the bed which in turn ruins the print 2. Most of my use cases use...
As I recall, last I heard from DC42 Input Shaping only works on single board setups. I assume this means the setups we use for the TC therefore...
What could work is what a 3D Printing producer used about 5 or so years back for a dual extruder system. IIRC he used a needle valve at the...
OK... bottomline result. The blocking pads are BAD!!! It not only does not work, the pads create a very hazardous situation. Two issues: 1. the...
Well... I for one will not be there. They want info from me they have to come here. I HATE DISCORD@!@# The pad idea may not have eliminated Prime...
So it's looks like the idea won't work. I tried everything I could think of. I retracted and detracted a range of lengths and a variety of...
That might have been too hasty. The extruder is clogging even with the priming turned back on and the pad removed.